Fence & gate company in Denton, TX

Morrison Gate & Fence is a fence and gate contractor serving Denton, TX. Fence choices depend on privacy, visibility and upkeep; gate choices depend on opening width, driveway slope and access needs. Repair is worth considering when damage is isolated and the supporting posts remain sound.

<nav aria-label="Breadcrumb"> <a href="/service-area">Service area</a> › <span aria-current="page">Denton</span> </nav>

What type of fence should I choose for my Denton property?

Start with what the fence must do. A privacy fence blocks views, while an open metal or chain-link fence defines a boundary without creating a solid screen. Pet containment also depends on height, picket spacing and gaps at the ground—not just the material.

| Wood privacy fence | Screening around a yard or outdoor space | Board movement, ground clearance and ongoing finish maintenance |Ornamental metal fence | An open view with a defined boundary | Picket spacing, corrosion protection and gate hardware |Chain-link fence | An open enclosure for a yard or utility area | Mesh size, coating, visibility and bottom gaps

Look beyond the fence panels. Post condition, rail connections, fasteners and gate framing affect how the whole fence performs. A heavier layout needs support suited to its weight and exposure.

If privacy is your priority, discuss sightlines from the street and adjoining properties before settling on a layout.

Should I repair my fence or replace it?

Repair makes sense when the failure is limited and the surrounding structure remains usable. Replacement deserves a closer look when deterioration affects multiple posts, rails or sections. New pickets will not correct a fence that leans because its supporting posts have failed.

| A few split or missing pickets | Targeted repair | Condition of the rails and nearby boards |One leaning section | Inspect before deciding | Posts, footings and connections |Widespread soft wood or repeated failures | Replacement | Full extent of deterioration |A gate that drags or will not latch | Diagnose the gate assembly | Hinges, frame alignment and supporting posts

Compare the scope of each option, not just the immediate bill. A repair proposal should explain what remains in place and what gets replaced. If several adjoining components are near failure, isolated repairs may leave the underlying problem unresolved.

Should my driveway gate swing or slide?

A swing gate needs a clear arc and enough ground clearance throughout its travel. A slide gate needs clear space beside the opening to receive the gate as it opens. Neither arrangement solves a poorly planned driveway entrance by itself.

Consider a swing gate when:

• The driveway provides unobstructed swing space.
• Changes in grade do not interfere with the gate leaf.
• Vehicles can wait clear of the moving gate.
• Supporting posts can carry the gate’s weight and operating loads.

Consider a slide gate when:

• Swing space is restricted.
• There is sufficient side space for the gate’s travel.
• The site can accommodate the selected track or cantilever system.
• Rollers, guides and other moving parts can remain accessible for maintenance.

Measure the clear opening and the available travel area. A cantilever gate includes a counterbalance section, so the space needed beside the driveway is greater than the opening alone. Also check where pedestrians will enter without passing through a moving vehicle gate.

What does an automatic gate need besides a motor?

An automatic gate needs a sound gate assembly, a correctly selected operator, suitable power, controls and safety equipment. The operator should move a properly functioning gate—not compensate for binding hinges, damaged rollers or a sagging frame.

Discuss these parts as one system:

• Gate structure: Posts, frame, hinges or rollers, guides and stops.
• Operator: Equipment selected for the gate’s length, weight, layout and expected use.
• Power: Electrical supply or a compatible alternative based on the equipment and site.
• Access controls: Options such as remotes, keypads or an intercom.
• Entrapment protection: Compatible monitored photo eyes, sensing edges or other required devices based on the installation.
• Outage access: Backup capability and a clearly understood manual-release procedure.

Controls that admit a vehicle are not necessarily safety devices. The layout must account for pinch points and areas where someone could be trapped by gate movement.

Before adding automation to an existing gate, have its mechanical condition assessed. Correcting drag or misalignment comes before operator installation.

What should I check before requesting a fence estimate?

Gather enough information to describe the job without guessing about boundaries or hidden site conditions. Photos and approximate measurements help with an initial discussion, but final scope depends on confirming the site.

Useful details include:

• The property address and the sections needing work.
• Approximate fence length and desired height.
• Preferred material and whether privacy is important.
• Number of walk gates and driveway gates.
• Visible damage, leaning posts or latch problems.
• Access restrictions for removal and installation.
• Slopes, retaining walls, drainage paths and nearby trees.
• Whether existing fencing needs removal and disposal.

Locate an available survey rather than treating the current fence as proof of the boundary. Before digging, arrange appropriate utility locating and clarify how private lines will be identified.

Ask the estimate to distinguish materials, post work, demolition, gates, finish work and any automation or electrical scope. Clear inclusions make comparisons more useful. You can contact Morrison Gate & Fence with photos and your priorities to start that conversation.

Can staining extend the life of an existing wood fence?

Staining can help protect sound wood from moisture exposure and sunlight, but it cannot restore rotten posts or weakened rails. Check the structure first, then decide whether finish work is worthwhile.

Look for soft wood near the ground, loose fasteners, split boards and failed connections. Replace damaged components before preparing the surface. Cleaning should remove dirt and unsuitable residue without unnecessarily damaging the wood fibers.

The wood must meet the stain manufacturer’s moisture and preparation requirements. Applying a finish over damp wood or an incompatible coating can affect absorption and performance. A small test area helps check appearance before treating the full fence.

Choose staining when the structure is sound and surface protection is the main concern. Choose repair first when components are loose or damaged. Where deterioration is widespread, compare replacement with the combined scope of repairs, preparation and staining.

Avoid treating a darker color as a substitute for proper preparation.

Do you serve properties outside Denton?

Morrison Gate & Fence serves the Dallas-Fort Worth metroplex as well as Denton. Check the service area overview for coverage information, and provide the property address when discussing a job outside Denton.

The property’s actual jurisdiction matters when checking construction requirements. A Denton mailing address alone should not be used to decide which rules apply.

For work involving several fence runs or separate entrances, identify each location and its purpose. A backyard privacy fence, a pedestrian gate and an automated driveway entrance need different measurements and hardware. Describing them separately helps keep the estimate clear and prevents assumptions about what is included.

Do I need a permit for a fence in Denton?

Permit requirements depend on the property and proposed work. Before construction, confirm current requirements with the City of Denton and check any applicable deed restrictions or HOA approval process. Verify property boundaries and easements separately; an existing fence line does not necessarily establish where a replacement fence may go.

How much does a fence or gate cost in Denton?

Cost depends on measured fence length, material, height, post requirements, demolition, site access and gate scope. An automatic gate also involves operator selection, electrical work, access controls and safety devices. Request an itemized estimate so you can compare equivalent materials and installation details rather than total price alone.

Can a fence be installed on sloped ground?

Yes, but the layout must account for changes in grade. Depending on the material and system, sections may follow the slope or step between posts. Review the resulting ground gaps, drainage and gate clearances before choosing a design, especially where the fence must contain pets.

Will an automatic gate work during a power outage?

It depends on the operator and installed backup equipment. A compatible battery backup may provide limited operation, while a manual release may allow the gate to be moved by hand. Confirm the specific system’s outage behavior, release procedure and maintenance needs before installation; backup operation is not automatic on every system.

Request a Denton fence or gate estimate. Call Morrison Gate & Fence at (469) 654-7729 or send your project details. Share the property address, photos and whether you are considering repair, replacement or a new installation.