Morrison
Gate & Fence

Fence and gate work in Dallas–Fort Worth includes wood fencing, driveway gates, automatic operators, access controls and repairs. The right setup depends on privacy needs, driveway space, daily use and the condition of existing posts and hardware. Morrison Gate & Fence serves the DFW metroplex with fence and gate services.

Home

What fence and gate options fit my property?

Start with the job you need the fence or gate to do. A wood privacy fence screens a yard, while a driveway gate controls vehicle entry. A pedestrian gate provides a separate walking entrance without opening the driveway.

For wood fencing, look beyond the boards. Posts, rails, fasteners and ground contact affect how the fence holds up. Replacement boards alone will not correct loose posts or deteriorated rails. Gate hinges and latches also need solid support to keep the opening aligned.

If vehicle access is the priority, compare driveway gate options around your opening width, driveway slope and available clearance. Choose the gate layout before selecting an operator or entry system.

Should I choose a swing gate or a sliding gate?

A swing gate needs a clear arc as it opens. A sliding gate moves alongside the fence line, making side clearance more important than swing clearance. Neither layout fits every driveway.

| Clear, reasonably level space behind the entrance | Swing gate | Leaf movement, vehicle waiting space and hinge-post support |Limited room for a gate to swing | Sliding gate | Unobstructed side run and suitable support |Driveway rises behind the entrance | Sliding gate or a carefully planned swing layout | Whether the moving gate will contact the ground

Explore sliding gate layouts if the driveway cannot accommodate a swing arc. A sliding layout still needs enough space beside the opening; it is not a solution for every tight entrance.

What does an automatic gate need besides a motor?

An automatic gate is a system, not just an operator attached to a gate. The gate must move freely, the supports must be sound, and the operator must suit the gate’s size, weight and use.

A planned system also considers:

• Power: A suitable supply and a plan for power interruptions.
• Entrapment protection: Compatible photo eyes, sensing edges and other protection required for the layout.
• Entry controls: Remotes, keypads or an intercom matched to how people enter.
• Vehicle detection: Equipment that can help manage opening, holding and closing.
• Manual release: A way to disengage the operator according to its instructions.

Read about automatic gate systems before choosing equipment. For decisions about visitors, deliveries and everyday entry, compare gate access-control options. Access controls do not replace safety devices.

Is it better to repair my gate or replace it?

Repair makes sense when the main structure is sound and the problem is limited to a serviceable component. Replacement deserves consideration when the structure cannot reliably support the gate or when the existing layout no longer meets your needs.

| Gate sags or drags | Hinges need adjustment and supports remain sound | Posts or the frame have substantial deterioration |Operator stops or behaves inconsistently | A diagnosed fault involves a replaceable component | Compatible parts are unavailable or the operator is unsuitable |Wood boards are damaged | Damage is isolated and rails remain solid | Deterioration extends through boards, rails and posts

A symptom alone does not establish the cause. Use gate repair services to investigate an existing fault, or review gate installation options when a new layout is needed.

If a powered gate is moving unpredictably, keep people and vehicles clear. Do not bypass safety devices. The gate troubleshooting guide offers a starting point for understanding common problems without assuming every fault requires replacement.

How do I check service coverage and prepare for an estimate?

Morrison Gate & Fence serves Dallas–Fort Worth. Check the service-area information and share your property address to confirm coverage for your location.

For an estimate, describe whether you need a fence, a new gate, automation or repair. Photos of the full opening, support posts and damaged areas help explain the scope. For an existing automatic gate, include the operator’s manufacturer and model if the label is safely accessible.

Approximate opening measurements can help start the conversation, but final dimensions and site conditions need verification. Note driveway slope, nearby obstructions and any documents that may affect placement, such as a survey or applicable association requirements.

Can an existing driveway gate be automated?

Often, but the gate must be suitable for powered operation. Its frame, posts, hinges or rollers need to be sound, and it should move freely by hand. Operator selection also depends on gate weight, dimensions, power availability and the safety devices required for the installation.

Why does my automatic gate stop before closing?

Possible causes include an obstructed photo eye, debris in the travel path, binding hardware or an operator fault. These symptoms can overlap, so the cause needs checking rather than guessing. Keep clear of the moving gate, never bypass a safety device, and request help if operation remains unreliable.

Do I need a new fence if some wood boards are damaged?

Not necessarily. Individual boards may be replaceable when the posts and rails are still sound. If posts lean, rails are deteriorated or damage extends across the fence, a broader repair or replacement may make more sense. The supporting structure matters more than the appearance of a few boards.

What information should I provide for a gate repair estimate?

Share your location, gate type and a clear description of what happens when you try to operate it. Photos of the gate, supports and operator label can help. Mention recent impacts or changes in operation, but do not remove covers or approach moving equipment to gather information.

<script type="application/ld+json"> { "@context": "https://schema.org", "@graph": [ { "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "/" } ] }, { "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can an existing driveway gate be automated?", "acceptedAnswer": { "@type": "Answer", "text": "Often, but the gate must be suitable for powered operation. Its frame, posts, hinges or rollers need to be sound, and it should move freely by hand. Operator selection also depends on gate weight, dimensions, power availability and the safety devices required for the installation." } }, { "@type": "Question", "name": "Why does my automatic gate stop before closing?", "acceptedAnswer": { "@type": "Answer", "text": "Possible causes include an obstructed photo eye, debris in the travel path, binding hardware or an operator fault. These symptoms can overlap, so the cause needs checking rather than guessing. Keep clear of the moving gate, never bypass a safety device, and request help if operation remains unreliable." } }, { "@type": "Question", "name": "Do I need a new fence if some wood boards are damaged?", "acceptedAnswer": { "@type": "Answer", "text": "Not necessarily. Individual boards may be replaceable when the posts and rails are still sound. If posts lean, rails are deteriorated or damage extends across the fence, a broader repair or replacement may make more sense. The supporting structure matters more than the appearance of a few boards." } }, { "@type": "Question", "name": "What information should I provide for a gate repair estimate?", "acceptedAnswer": { "@type": "Answer", "text": "Share your location, gate type and a clear description of what happens when you try to operate it. Photos of the gate, supports and operator label can help. Mention recent impacts or changes in operation, but do not remove covers or approach moving equipment to gather information." } } ] } ] } </script>

Request a fence or gate estimate: Call Morrison Gate & Fence at (469) 654-7729 to discuss your property, repair needs or installation plans.