Fence & gate company in Allen, TX

Fence and gate work in Allen starts with checking the fence posts, property boundaries, gate clearance and intended use. Localized damage may need repairs; widespread deterioration may call for replacement. For driveway gates, the opening, available travel space and condition of the hardware help determine the layout and whether automation is practical.

Home › Service areas › Allen

Morrison Gate & Fence serves Allen with fence and gate work. Use the comparisons below to identify what needs attention and prepare for an estimate.

What should I check before installing a fence in Allen?

Start with the boundary, not the existing fence. An old fence is not proof of a property line. Review your survey and identify easements before deciding where posts should go. Confirm applicable requirements with the City of Allen and, if relevant, your HOA; do not assume a replacement is automatically exempt from review.

Then work through the physical details:

• Purpose: Decide whether the fence is for privacy, pets, access management or defining a boundary.
• Ground conditions: Note slopes, drainage paths, exposed roots and areas where water collects.
• Access: Measure openings needed for lawn equipment, trash bins and other regular traffic.
• Post locations: Arrange utility locating before digging, and identify private lines that may need separate attention.

Discuss the fence height, material, gate locations and finished appearance together. A layout that looks straightforward on paper can require changes when a gate swings across a slope or a post location conflicts with an obstruction.

Should I repair my fence or replace it?

The useful question is whether the structure supporting the fence is still sound. Replacing pickets will not correct failed posts, and staining will not restore decayed rails. Check posts at ground level, rail connections and gate hardware before choosing cosmetic work.

| Split or missing pickets | Damage is limited and the rails hold fasteners securely | Damage is widespread or the supporting rails are deteriorated |Leaning sections | The problem is isolated to a post or connection | Several posts are loose, decayed or unable to support the fence |Sagging walk gate | Hinges, fasteners or alignment need correction | The frame is distorted or the supporting post has failed

A mixed approach can also work: replace a failed section and repair adjacent sound sections. Ask how new materials will match the existing fence. Fresh wood can differ noticeably in color and texture, even when the board dimensions match.

Which fence material fits my property and maintenance plans?

Compare materials by what they need to do, rather than appearance alone.

Wood can provide privacy with closely spaced pickets. Its performance depends on the posts, rails, fasteners and board condition. Plan for periodic inspection and appropriate finishing; stain is a surface treatment, not a structural repair.

Metal fencing can define a boundary while preserving visibility. Check the opening pattern against your containment needs. Coated steel components need attention where scratches, damaged welds or other coating failures expose the metal.

For either material, ask what the proposed assembly includes. “Wood fence” or “metal fence” does not fully describe post construction, rail arrangement, hardware or finish. Those details help you compare estimates on the same basis.

Which gate layout works for my yard or driveway?

Choose the layout around the actual opening and the space beside and behind it. Check the full travel path, not just the gate’s closed position.

| Single swing | Clear swing area on one side of the opening | Can the leaf move without hitting a slope, vehicle or obstruction? |Double swing | Clear travel for both leaves and room at the center | Will the opening and daily access needs justify two moving leaves? |Sliding | Unobstructed travel space beside the opening | Is there enough side room for the gate and its support arrangement?

A swing gate may conflict with rising ground. A sliding gate avoids a swing arc but still needs suitable support and side clearance. For driveway access, consider where a vehicle waits while the gate opens and how visitors reach the entry controls.

What is the difference between gate automation and access control?

Automation moves the gate. It includes an operator and the equipment needed to open and close the gate.

Access control determines how entry is requested or authorized. Examples include a keypad, remote transmitter or intercom. Adding a keypad does not fix worn hinges, a binding gate or an unsuitable operator.

Before automating an existing gate, check:

• Frame condition, hinges or rollers, alignment and unrestricted manual movement.
• Gate size and weight against the operator’s specifications.
• Available power and the route for wiring.
• Manual release arrangements during a power loss.
• Entrapment zones and appropriate monitored safety devices, such as photoelectric sensors or sensing edges.

The operator, controls and protective devices need to work as a compatible system.

What affects a fence or gate estimate in Allen?

An estimate depends on more than fence length. Material choice, demolition, post work, access, terrain and the number of gates all affect the work involved. An automated gate also requires assessment of its mechanical condition, power, wiring, controls and safety equipment.

To make the discussion useful, gather:

• Photos of the full fence line and close-ups of damage.
• Approximate fence length and gate opening measurements.
• Your preferred material, privacy level and gate use.
• Information about slopes, tight access or nearby obstructions.
• Any survey or approval documents relevant to the proposed work.

Measurements and photos help describe the job, but they do not establish underground conditions or hidden structural damage. Ask the written scope to distinguish repairs, replacement, removal, finishing and gate equipment.

You can contact Morrison Gate & Fence to discuss these details and request an estimate.

Does Morrison Gate & Fence also serve cities near Allen?

For work beyond Allen, review the Dallas-Fort Worth service area. If your property is in nearby Plano in Collin County, the Plano fence and gate page provides the corresponding city information. Share the project address when you inquire so the location and scope can be discussed together.

Can you replace damaged fence boards without replacing the whole fence?

Yes, individual boards can often be replaced when the posts and rails remain sound. The repair should also address loose fasteners or the source of damage. If the supporting structure is decayed or unstable, replacing boards alone will not restore the fence’s strength or alignment.

Can an existing driveway gate be automated?

Sometimes. The gate must move freely and have a sound frame, suitable supports and compatible hardware. An assessment should also cover operator sizing, power, wiring, manual release and entrapment protection. Mechanical defects should be corrected before automation is added; an operator should not be used to overcome binding.

Should I stain a wood fence before repairing it?

Repair the fence first. Replace deteriorated boards, address loose connections and correct structural problems before surface preparation and staining. New and existing wood may absorb stain differently. Follow the stain manufacturer’s instructions for cleaning, wood moisture and application conditions rather than assuming every board is ready at the same time.

Do I need approval before replacing a fence in Allen?

Confirm the requirements for your address and proposed work with the City of Allen before starting. If your property has an HOA, check its applicable review process separately. Changes to fence location, height, material or gates may affect what needs review; do not rely on a neighbor’s project as approval.

Request an estimate for your Allen fence or gate project. Call Morrison Gate & Fence at (469) 654-7729 or send your project details to discuss the work.