Fence & gate company in Garland, TX

Morrison Gate & Fence serves Garland, TX, with fence installation, fence repair, gate installation, automation and access-control services. Choosing the right work starts with the condition of your posts and fence sections, the gate opening, and how you use the property. Isolated damage may need repairs; widespread deterioration may justify replacement.

Home > Garland

What should I consider when installing a fence in Garland?

Start with the fence’s purpose: privacy, containing pets, defining a boundary or controlling access. Then consider the material, height, visibility and maintenance you are willing to handle. A solid wood privacy fence serves a different purpose from an open metal fence that preserves sightlines.

For wood fencing, look beyond the pickets. Posts carry the structure, rails support the pickets, and fasteners connect the assembly. Replacing boards will not solve movement caused by unstable posts. Ground contact and persistent moisture also deserve attention when evaluating deterioration.

Plan walk gates around everyday use, including lawn equipment and trash-container access. Discuss the layout through our fence installation service before settling on materials. Existing fence placement is not, by itself, proof of a property boundary.

Should I repair my fence or replace it?

Repair is worth considering when damage is limited and the surrounding structure remains sound. Replacement becomes more practical when several parts of the fence are deteriorating or repeated patching would leave weak sections in place.

| A few split or missing pickets | Repair individual boards | Condition of rails and fasteners |One leaning section | Repair after identifying the cause | Posts, footings and connections |Deteriorated posts across multiple sections | Compare broader repair with replacement | Remaining structural condition |Widespread loose rails and decayed boards | Replacement | Layout, materials and gate locations

A fence repair assessment should identify the cause, not just the visible symptom. For example, straightening a leaning section without addressing an unstable post can leave the underlying problem unresolved.

Staining is a maintenance step, not a structural repair. Damaged components need attention before surface preparation and coating decisions.

Which gate type fits my property?

A walk gate provides pedestrian access; a driveway gate must accommodate vehicles and their approach. Both need properly supported hinges or running hardware, suitable posts and a latch or operator arrangement that matches the intended use.

When planning gate installation, consider the clear opening rather than only the overall gate dimensions. Hinges, posts and stops can affect usable space.

For driveway gates, swing and sliding designs have different space requirements:

• Swing gate: Needs a clear arc of travel. Slope, parked vehicles and nearby obstacles can interfere with movement.
• Sliding gate: Needs room beside the opening for the gate to retract. Support hardware and the travel path must suit the site.

Neither design fits every driveway. The approach, grade and available side clearance should guide the choice before selecting an operator.

Can an existing driveway gate be automated?

An existing gate may be suitable for automation if it is structurally sound, properly supported and moves freely. An operator should not be used to force a sagging, dragging or binding gate through its travel.

Planning automatic gate installation involves more than adding a motor. Gate weight, length, movement type, power availability and usage all affect equipment selection. Photoelectric sensors, sensing edges and other protective measures must be evaluated against the operator’s instructions and applicable safety requirements.

If the gate moves poorly by hand, address its mechanical condition first. Automation adds convenience, but it does not correct worn hinges, inadequate posts or an obstructed travel path.

What access control do I need for an automatic gate?

Choose access control around who enters and how permission changes. A remote can suit regular users, while a keypad allows entry by code. An intercom can help screen visitors before granting access. Connected options also depend on compatible equipment and reliable communications at the entrance.

Our gate access-control service covers the entry-control side of the system. Discuss these practical questions before choosing devices:

• Who needs daily access?
• How will visitors and deliveries enter?
• How will access be removed when it is no longer needed?
• How will authorized users operate the gate during a power interruption?

Keep exit arrangements and emergency access in the planning discussion rather than treating them as add-ons.

What information helps with a Garland fence or gate estimate?

Provide photos of the full fence line or gate, close-ups of damage, and approximate dimensions if available. Mention leaning posts, dragging gates, operator faults, changes in grade and restricted access to the work area.

Before construction, confirm property boundaries, identify utility-locating needs and check any applicable City of Garland requirements or property restrictions. Requirements depend on the proposed work; do not assume a replacement follows the same process as a new layout.

For another property, see our service information for Grand Prairie or Mesquite. Describe each location separately so the discussion reflects its actual fence condition and access needs.

Can you replace fence pickets without replacing the posts?

Yes, individual pickets can often be replaced when the posts and rails are still sound. The important step is checking the supporting structure first. If posts are loose or rails are deteriorated, replacing pickets alone will not restore stability. Replacement boards may also look different from weathered wood.

Why does my gate drag on the ground?

A dragging gate can result from loose hinges, shifting posts, frame sag or changes along its travel path. The repair depends on the cause. Adjusting a latch will not correct a moving post. For an automated gate, stop operating it if dragging creates binding or unsafe movement.

Does an automatic gate work during a power outage?

That depends on the operator and its installed backup equipment. Some systems can use battery backup; others require a manual release procedure. Ask how your proposed system behaves when power fails, how authorized users release it, and what maintenance its backup equipment needs. Do not assume backup is included.

Should I stain a wood fence before repairing it?

Repair damaged or unstable components before staining. A coating cannot restore decayed wood, secure a loose post or reconnect a failed rail. After repairs, the surface needs preparation appropriate to its condition and the selected product. Follow the coating manufacturer’s directions for cleaning, drying and application conditions.

To discuss fence or gate work in Garland and request an estimate, call Morrison Gate & Fence at (469) 654-7729. Share the problem, your intended use and any photos that help explain the work.

<!-- Route metadata: resolve these URL paths against the site's existing production origin when rendering absolute canonical, og:url and structured-data URLs. -->