Wood Fence Installation in Garland, TX

People usually start thinking about a new wood fence for practical reasons. The backyard feels exposed to the street or the house behind it. The property line isn't clearly marked. Or the old fence has weathered and loosened along so much of its length that patching it no longer makes sense.

Some owners want to enclose a patio or lawn so it feels more like a private outdoor space. Others want a short run that hides a side yard with trash carts, a pool pump, or an AC unit. Because gates go in at the same time, a new fence is also a good moment to rethink where walk gates and wider openings should be.

Cedar is a common choice when privacy is the main goal. Tight boards block the view, and the warm tone of the wood looks good next to shrubs, flower beds, and shade trees. How the boards are arranged changes the result. Standard side-by-side pickets give a clean, simple face, while overlapping board-on-board helps keep gaps covered as the wood expands and shrinks with the seasons.

Garland summers bring strong sun and heat, and spring storms bring wind and heavy rain, so the wood will change color over time. Staining or sealing now and then helps keep its appearance. We'll go over what upkeep to expect so you can choose a board style and finish you're comfortable maintaining.

A residential wood fence is often more than one straight run. It can include the rear line, side returns that meet the house, a boundary shared with a neighbor, and shorter sections around a deck or outdoor seating area. Each part may need a different height or finish depending on what it has to screen.

Where the fence meets a walkway or the driveway, the gate should match the fence. Our residential gate options cover wood and metal gates that can be built into a new fence.

1. Walk the yard and look at the overall property layout.
2. Talk through privacy goals and how you get in and out of the yard.
3. Check existing fence sections, gates, and where they tie in.
4. Mark the new fence line, corners, and gate openings.
5. Clear and prepare the ground along the planned line.
6. Set posts, then add rails and boards to match the chosen design.
7. Check the finished fence for alignment and test each gate.

How private a fence feels depends on who can see into the yard and from where. A neighbor's upstairs windows, a corner lot facing the street, or a patio right beside a property line may need full-height screening, while other stretches may not. Landscaping matters too. Existing trees and beds can add to the screening or get in the way of posts.

Some Garland yards already have a neighbor's fence along one side, a brick or stone column, or an older fence line the new fence has to meet. Side-yard gates should stay where people actually walk. If your property is covered by an HOA, or if City of Garland rules may apply, check those requirements before the design is final. We can build to the specifications you receive.

A fence that closes in the yard still has to let people, equipment, and service visits through. During layout we plan for walk gates, side-yard openings, the path from the driveway, room for lawn equipment, and access to meters or landscaping. If you might want an automatic driveway gate someday, leaving space for it now saves reworking the fence later.

For walk and yard gates, see our gate installation service. For wider vehicle openings, our driveway gate styles page covers the options.

Replacing the whole fence is worth considering when weathering runs along most of it, the same posts keep loosening, long sections lean, or large areas are broken. It also makes sense if you now need taller screening or a different layout.

If only a few spots are damaged, our fence repair service may be all you need.

A new fence is usually the right call when there's no fence yet, when most of the old one has deteriorated, when the fence line is moving, or when you want a different privacy setup.

A repair is usually enough when the damage is in one area, only some boards or posts are affected, and most of the fence is still in good shape.

For our general approach to new fences, see fence installation. For fixing a fence that's already standing, see repairing a damaged fence.

Garland has many established neighborhoods, and lot shapes and sizes vary from one street to the next. Some yards have older fence lines, mature trees, or narrow side yards. Others have brick or stone features the fence needs to meet. We look at each property as it is instead of using a standard layout.

Gates are usually placed based on how people move between the driveway, side yard, and back door. Beds and trees along the line can affect where posts go. Where an HOA or City of Garland rule may apply, it can affect the design and when work can begin.