Fence & gate company in Dallas, TX

A Dallas fence and gate contractor can help with fence installation, damaged posts and panels, driveway gates, gate automation, and access controls. The right approach depends on structural condition, property boundaries, driveway clearance, and how you use the entrance. Repair makes sense when damage is isolated; replacement deserves consideration when deterioration affects the whole fence.

Service area › Dallas

<!-- Route metadata: Set the self-referencing canonical and og:url to the existing production site's absolute URL for /service-area/dallas. Use the configured site origin; do not guess the hostname. Resolve the relative BreadcrumbList item URLs below against that same origin. -->

What should I consider before installing a fence in Dallas?

Start with what the fence needs to do: provide privacy, contain pets, define a boundary, or control access. Those goals affect the material, layout, gate placement, and maintenance requirements. A privacy fence and an open metal fence solve different problems.

Before choosing materials, work through these site details:

• Property boundaries: Use reliable boundary information rather than assuming an existing fence marks the legal line.
• Grade and drainage: Plan how the fence follows slopes without obstructing drainage.
• Posts and footings: These carry the load. New boards will not correct a failing support system.
• Gate openings: Allow practical access for people, equipment, and routine maintenance.
• Underground utilities: Confirm utility locations before digging.

Wood allows solid privacy layouts but needs ongoing care. Open metal fencing preserves visibility but does not provide the same screening. Discuss those tradeoffs with Morrison Gate & Fence before settling on a layout.

Should I repair my Dallas fence or replace it?

Judge the support structure before judging appearance. Loose pickets, a broken latch, or a damaged section may be repairable without rebuilding the entire fence. Widespread decay, unstable posts, and failing rails call for a broader assessment.

| Damaged pickets or boards | Damage is limited and surrounding wood is sound. | Boards throughout the fence are deteriorating. |Leaning sections | A localized post or connection failure caused the lean. | Multiple posts or footings are unstable. |Sagging walk gate | Hinges, fasteners, or alignment need correction. | The frame is distorted or supporting posts have failed. |Weathered wood | The structure remains sound and needs surface maintenance. | Decay affects posts, rails, or other load-bearing parts.

A useful estimate should distinguish cosmetic work from structural work. Ask which components will stay, which will be replaced, and whether retained sections are likely to limit the repair’s usefulness.

If only part of the fence needs replacement, discuss the transition between old and new materials. New wood may differ in color and appearance from weathered boards even when the dimensions match.

Which driveway gate layout works for my Dallas property?

A driveway gate must fit the entrance and have room to move. Opening width alone does not determine whether a swing or slide gate will work.

Choose a swing layout when there is clear space for the gate leaves to travel without striking vehicles, landscaping, or rising ground. A single swing gate uses one leaf; a double swing gate divides the opening between two leaves.

Consider a slide layout when swing clearance is restricted and there is sufficient room alongside the entrance for the gate to retract. A tracked slide gate needs attention to the travel surface. A cantilever arrangement uses a different support system and needs additional side space for its frame and counterbalance.

For either layout, check:

• Where a vehicle waits while the gate opens.
• Whether the driveway slope conflicts with gate movement.
• How deliveries and visitors will enter.
• Whether pedestrians need a separate walk gate.
• Where posts, controls, and operator equipment can sit.

Choose the layout around the property, not around a preferred motor. Gate geometry and structural support come first.

Can my existing driveway gate be automated?

An existing gate may be suitable for automation if the frame, posts, hinges or rollers, and travel path are sound. Automation should not be used to force a binding or sagging gate through its movement.

An assessment should check the gate’s weight and dimensions, expected use, available power, and operator compatibility. It should also identify pinch points and entrapment hazards throughout the opening and closing cycle.

Parts that may be involved include:

• A gate operator matched to the gate type.
• Photoelectric sensors and monitored safety edges, as required by the system design.
• Stops, hinges, rollers, or other supporting hardware.
• Power connections and control wiring.
• A manual release and, where compatible, backup power.

If the gate already moves poorly by hand, address that mechanical problem before selecting automation equipment. Ask how the proposed system handles an obstruction and how you would operate it without normal power.

Which access controls make sense for a driveway gate?

Choose access controls around who needs entry and how often. A household with regular drivers has different needs from a property that receives frequent visitors.

| Remote transmitter | Regular vehicle access | Who receives a remote and how lost devices are removed. |Keypad | Entry without a handheld remote | Code sharing and how codes are changed. |Intercom | Speaking with visitors before entry | Communication method, connectivity, and compatibility.

Access devices and safety devices serve different purposes. A keypad grants entry; it does not replace obstruction protection. Likewise, a vehicle loop is not a substitute for all required entrapment protection.

Keep daily operation straightforward. Ask how to add or remove users, release the gate manually, and troubleshoot a control that stops communicating with the operator.

Do you serve properties outside Dallas?

Morrison Gate & Fence serves the Dallas-Fort Worth metroplex. If your property is outside Dallas, see the nearby Dallas County pages for fence and gate service in Irving and fence and gate service in Garland.

You can also review the service-area overview and share your property address when requesting an estimate. Location helps establish the site being discussed, but the work itself still depends on access, fence condition, gate layout, and the requested scope.

What information should I provide for a fence or gate estimate?

Send enough information to show both the problem and the surrounding site. Close-up photos help identify damaged parts, while wider views show alignment, access, and nearby obstacles.

Useful details include:

• The Dallas property address and your contact information.
• Whether you need a new installation, repair, replacement, or automation.
• Approximate fence length and gate opening width, if known.
• Photos of posts, rails, hinges, latches, rollers, and damaged sections.
• For automated gates, the operator’s brand and model label.
• Your priorities for privacy, access, appearance, and maintenance.

Measurements supplied remotely are a starting point, not a substitute for checking the site. Tell Morrison about recurring problems rather than only the latest symptom. Use the contact page to request an estimate and include any relevant photos.

Do I need approval before changing my Dallas fence?

Approval requirements depend on the property and proposed work. Check with the City of Dallas about applicable requirements, and review any deed restrictions or association documents that affect your address. Do not assume replacing an existing fence means every change is allowed. Confirm boundaries and any relevant easements before finalizing the layout.

Can staining fix a damaged wood fence?

Staining can help protect sound wood and improve its appearance, but it cannot restore rotten posts, split rails, or loose structural connections. Repair those defects first. The surface also needs suitable preparation and drying conditions. If the fence is unstable, assess the structure before spending money on a new finish.

Will an automatic gate open during a power outage?

That depends on the operator and installed backup equipment. Some systems support battery backup; others require manual release when power is unavailable. Ask for instructions specific to your operator, including how to disengage it safely and secure the gate afterward. Backup operation also depends on battery condition and system configuration.

Why does my driveway gate keep sagging?

Sagging can come from loose hinges, worn hardware, a distorted frame, or movement in the supporting post or footing. Adjusting the latch alone may hide the symptom without correcting the cause. Check the supports and gate alignment first, then identify whether hardware repair or structural work is needed.

For a Dallas fence or gate estimate, call Morrison Gate & Fence at (469) 654-7729 or send your project details through the contact page. Share what needs attention and what you want the finished fence or gate to do.