Fence & gate company in Fort Worth, TX

A fence and gate contractor in Fort Worth can help with wood fence installation, fence repairs, driveway gates and automatic gate systems. The right approach depends on post condition, privacy needs, driveway clearance and gate hardware. Compare those factors before deciding whether to repair an existing fence or replace it.

Service area › Fort Worth

Morrison Gate & Fence serves Fort Worth as part of its Dallas–Fort Worth service area. For a property outside Fort Worth, check the areas we serve, including our nearby Arlington service area. When requesting an estimate, describe the problem or planned installation so the discussion starts with the work your property needs.

What type of wood fence should I choose in Fort Worth?

Start with how much privacy you want, then compare the boards, framing and posts. Fence style alone does not tell you how the structure will hold up.

• Side-by-side pickets: Boards sit next to each other. As wood dries and changes dimension, gaps can develop between boards.
• Board-on-board pickets: Boards overlap to limit direct sightlines through the fence. The overlap uses more material and adds weight compared with a similar side-by-side layout.
• Wood posts: Ask how the proposed posts are treated for their intended exposure, especially ground contact.
• Steel posts: These avoid wood decay at the post itself, but still require suitable sizing, foundations and connections to the rails.

Cedar and pressure-treated lumber are materials worth comparing. Ask the estimate to identify the wood species, treatment where applicable, picket dimensions, rail arrangement and post material.

Choose the complete fence assembly rather than relying on the wood name alone. Fasteners should also be compatible with the wood and any preservative treatment.

Should I repair or replace my fence?

Repair makes sense when the damage is limited and the surrounding structure remains sound. Replacement becomes more practical when failing posts, deteriorated rails or widespread board damage would leave little usable fence after repairs.

| Broken or missing pickets | Nearby boards and rails still hold fasteners | Many boards are split, decayed or loose |A leaning section | The cause is isolated to one post or connection | Several posts or foundations have failed |A sagging walk gate | The frame and supports are sound | The frame is distorted or supports need rebuilding

A leaning panel is not always just a panel problem. The post, footing or surrounding ground may be responsible.

Ask what will remain after the repair and why it is worth keeping. Replacing visible boards without addressing a failed support can leave the original problem unresolved.

Should I choose a swing gate or a sliding driveway gate?

Choose the gate movement around the available space, not just its appearance. Both designs need sound supports and hardware matched to the gate.

| Clear space inside the driveway | Needs room for the full swing arc | Does not need a swing arc |Open space beside the entrance | May need less side storage space | Needs lateral space for the gate to open |Rising driveway surface | The gate may contact the ground as it swings | Travel path and support design need assessment

A sliding gate may use a ground track or a cantilever arrangement. A cantilever gate generally needs additional length beyond the driveway opening to support its movement.

Measure the entrance, side clearance and vehicle approach before choosing a layout. Photos alone may not reveal changes in grade.

What does an automatic gate system need besides a motor?

An automatic gate needs a mechanically sound gate, an appropriately selected operator, reliable power, controls and protection against entrapment. Adding a larger motor does not correct worn hinges, a bent frame or a gate that binds.

The proposed system should address:

• Gate movement: Hinges, rollers, tracks and stops must suit the gate design.
• Operator selection: Gate weight, length, movement type and expected use affect the selection.
• Power: Electrical supply or a suitable solar arrangement needs assessment for the site and equipment.
• Access controls: Options may include remotes, keypads, intercoms or vehicle detection.
• Entrapment protection: Photoelectric sensors and sensing edges may be required for identified hazards under the equipment instructions and applicable standards.
• Manual access: Understand how the gate releases during a power or equipment failure.

Keep safety devices separate from convenience features when comparing proposals. A keypad controls who requests entry; it does not replace entrapment protection.

Ask where the controls and sensors will sit, how wiring will be protected and what routine checks the equipment requires.

What should I check before installing a fence in Fort Worth?

Confirm the boundary, site conditions and applicable requirements before setting the fence line. An existing fence is not, by itself, proof of a property boundary.

Review these items before work begins:

1. Boundary information: Locate available survey documents and resolve uncertain lines before installation.
2. Easements and access: Check recorded restrictions and whether access must remain available.
3. Local requirements: Verify current City of Fort Worth requirements for the proposed height, location and gate arrangement.
4. Property restrictions: If an HOA or other recorded restrictions apply, confirm what approval is needed for your specific property.
5. Utilities: Arrange appropriate utility locating before digging. Ask whether private lines need separate locating.
6. Site obstacles: Identify irrigation, tree roots, retaining walls, drainage paths and changes in ground level.

For a driveway gate, also check how vehicles enter and wait without obstructing adjacent travel areas. Bring uncertain conditions to the estimate discussion rather than assuming the new fence can follow the old layout unchanged.

How much does a fence cost in Fort Worth?

A useful fence estimate depends on measured length, materials, layout and site conditions. A per-foot figure without a defined scope can hide important differences between proposals.

The main cost factors include:

• Total fence length and proposed height.
• Picket style, wood specification and framing.
• Post material, spacing and foundation requirements.
• Number, width and construction of gates.
• Removal and disposal of the existing fence.
• Access limitations, slope and obstructions.
• Staining or other specified finish work.
• Gate operators, controls, electrical work and safety equipment.

Repair pricing also depends on what can remain. Replacing one accessible post is a different scope from dismantling several connected sections to reach failed supports.

For an automatic driveway gate, separate the gate structure from the automation equipment in the estimate. This makes it easier to understand what is included and whether electrical or related work needs separate coordination. Request a site-specific estimate rather than treating a general price range as a quote.

How do I compare fence and gate estimates?

Compare written scope before comparing totals. Two proposals can describe the same fence length but specify different posts, rails, boards or gate hardware.

Look for material descriptions, dimensions, demolition responsibilities and any exclusions. For repairs, the proposal should distinguish components being replaced from components being reused.

For powered gates, compare the operator model, access controls, safety devices, power arrangement and manual-release provisions. Ask which site conditions still need confirmation before the scope is final.

Check how changes will be documented if concealed damage or unexpected digging conditions appear. A clear estimate should help you understand both the planned work and its limits—not leave you guessing which tasks the total covers.

Can I automate an existing driveway gate?

Sometimes, but the gate must move freely and have sound posts, hinges or rollers before an operator is added. Its size, weight, travel path and available power also matter. Have the mechanical condition and entrapment hazards assessed first; repairing or rebuilding the gate may be necessary before automation.

Should I stain a new wood fence right away?

Not necessarily. New wood must be dry enough for the selected stain, and the surface preparation must follow the product instructions. Pressure-treated lumber may need time to dry. Use the stain manufacturer's moisture guidance rather than a fixed waiting period, and check the forecast before application.

Do I need a property survey before replacing a fence?

You need reliable boundary information, but whether a new survey is necessary depends on the documents available and any uncertainty about the line. Do not assume an old fence marks the legal boundary. If corners, easements or ownership are unclear, resolve those questions with a qualified surveyor before installation.

What should I send when requesting a fence estimate?

Send the Fort Worth property address, approximate fence length, preferred height and photos of the full fence line. Include close-ups of damaged posts or hardware. For a driveway gate, add the opening width, available side space, driveway slope and whether you want manual operation or an automatic system.

Request a Fort Worth fence or gate estimate. Call Morrison Gate & Fence at (469) 654-7729, or send your project details through our contact page to discuss the scope.

<!-- React head integration: Resolve /service-area/fort-worth against the existing production site origin. Use that same absolute URL for rel="canonical" and og:url. Resolve the BreadcrumbList item paths below against that origin as well; do not change the route. -->