Fence & gate company in Richardson, TX

For fence and gate work in Richardson, choose materials around privacy, maintenance, and access needs. Repair can make sense when damage is isolated and supporting posts remain sound. Replacement deserves consideration when deterioration is widespread. Before adding a gate operator, check the gate’s structure, movement, power supply, and safety requirements.

<nav aria-label="Breadcrumb"> <a href="/service-area">Service areas</a> &gt; <span aria-current="page">Richardson</span> </nav>

What fence material should I choose for my Richardson property?

Start with what the fence needs to do: screen a yard, contain pets, define a boundary, or control access. Then compare upkeep and how the material connects to posts, rails, and gates. A material that works well for a straight fence run may need different framing at a wide gate opening.

| Wood | Privacy and a solid visual boundary | Boards, rails, and posts need inspection for decay, splitting, and loose connections. |Ornamental steel | An open view with a defined boundary | Damaged coatings and welded connections need attention to limit corrosion. |Aluminum | An open-view fence without steel’s rust concerns | Section strength, fasteners, and gate framing must suit the intended use.

For a wood privacy fence, compare board spacing and layout as well as lumber choice. A board-on-board layout overlaps pickets to reduce direct sightlines, while a side-by-side layout can develop visible gaps as boards change with moisture.

For pet containment, check the space beneath the fence and between pickets. For metal fencing, discuss the finish and how damaged areas can be maintained. Morrison Gate & Fence can help you compare these choices against your property’s access and maintenance needs.

Should I repair my fence or replace it?

The deciding factor is usually the condition of the supporting structure, not the appearance of one damaged panel. Replacing boards will not correct unstable posts, failed rails, or a recurring drainage problem.

| Broken or missing pickets | Nearby boards, rails, and posts are sound | Deterioration affects most of the fence run |Leaning sections | The problem is limited to a post or connection | Multiple posts or footings have failed |Rusted metal | Corrosion is limited and connections remain sound | Material loss compromises posts, frames, or welds

Ask for the proposed repair scope to identify the cause and the affected components. “Fix the leaning fence” is less useful than specifying whether the work includes posts, footings, rails, or panel connections.

Where damage is limited, preserving sound sections can avoid unnecessary demolition. Where failures repeat across the run, compare a complete replacement with the likely sequence of future repairs.

What should I check before installing a driveway or walk gate?

Measure the usable opening, not just the distance between existing fence panels. Gate posts, hinges, stops, and latches take up space. A driveway gate also needs clearance for vehicles approaching at an angle.

Check these conditions before selecting a layout:

• Ground slope: A swing leaf needs room to travel without scraping the driveway.
• Swing clearance: Vehicles, landscaping, and pedestrian routes must stay clear of its travel.
• Slide clearance: A sliding gate needs room beside the opening for the leaf to retract.
• Support: Gate posts and their foundations must suit the gate’s weight and movement.
• Hardware: Hinges, latch receivers, rollers, guides, and stops should match the design.
• Daily access: Plan how people on foot will enter without relying on a moving vehicle gate.

A swing gate and a slide gate solve different space problems. Swing gates need a clear arc; slide gates need a suitable travel path along the fence line. Neither layout is automatically the right choice for every driveway. Site measurements should guide the decision before fabrication or operator selection.

Can my existing driveway gate be automated?

An existing gate may be suitable for automation if its frame and supports are sound and it moves freely by hand. An operator should move a correctly functioning gate, not force a sagging or binding gate through its travel.

The assessment should cover:

• Gate weight, length, balance, and travel.
• Post stability and hinge or roller condition.
• Operator mounting space and available power.
• Entrapment areas and required protective devices.
• Access controls, manual release, and outage access.

Swing and slide operators are not interchangeable. The selected equipment must match the gate configuration and the manufacturer’s specifications.

Safety planning can include photoelectric sensors and sensing edges, depending on the equipment and installation. Do not assume a vehicle-detection loop provides pedestrian protection. Resolve structural and safety issues before choosing convenience features such as keypads or remote controls.

What information should I send for a fence or gate estimate?

A useful estimate starts with the location, the problem, and the desired result. Send an overview rather than only a close-up of a broken part. Wide photos help show how fence sections, gate posts, pavement, and surrounding obstacles relate to one another.

Include:

• The Richardson property address and contact information.
• Whether you need a new installation, repair, replacement, or automation assessment.
• Approximate fence length, intended height, and gate opening width.
• Preferred material and whether privacy or visibility matters more.
• Photos of both sides of damaged areas, where accessible.
• Details about access restrictions, grade changes, and existing equipment.
• Whether old fencing or gate equipment needs removal.

Label measurements as approximate unless they have been checked for construction. Property records or a survey can help clarify the intended fence line, but an existing fence alone does not establish the legal boundary.

Use the contact page to request a fence or gate estimate. Ask that the scope distinguish demolition, materials, structural work, hardware, automation, and cleanup so you can compare proposals on the same basis.

What should I verify before fence work begins in Richardson?

Confirm the intended property line, any easements, and applicable requirements before committing to a fence height or gate location. Check with the City of Richardson about requirements for your specific address and scope. If the property has an association or other recorded restrictions, review those separately.

Plan utility locating before digging. Ask how privately owned lines, such as irrigation or power to an existing gate, will be identified. Do not assume every underground line is covered by the same locating process.

For properties elsewhere in the metroplex, see information about fence and gate work in Dallas, Irving, or Garland. You can also review the service-area overview when coordinating work at another address. Requirements and site conditions should be checked for each property rather than carried over from a nearby city.

Can I replace only one section of my fence?

Yes, replacing one section can make sense when adjacent posts, rails, and panels remain sound. The new section still needs secure connections and compatible dimensions. Expect possible differences in color and weathering. If neighboring sections show similar deterioration, compare a localized replacement with work on the full affected run.

Why does my walk gate keep dragging?

A dragging walk gate can result from loose hinges, a sagging frame, shifting posts, or changes in ground clearance. Adjusting the latch alone may hide rather than solve the problem. Check the supports and frame first, then correct alignment and hardware so the gate moves freely and latches consistently.

Will an automatic driveway gate work during a power outage?

That depends on the operator and its power setup. Some systems support battery backup, while others require a manual release when power is unavailable. Confirm the specific equipment’s capabilities and learn the manufacturer’s release procedure. Plan access from both sides of the gate before an outage occurs.

Can a fence estimate be prepared from photos?

Photos and approximate measurements can support an initial discussion, but they may not reveal post decay, footing conditions, grade changes, or gate alignment. A site assessment may be needed to define the work accurately. Include wide views and close-ups, and identify any areas that cannot be safely accessed.

Request an estimate for your Richardson property. Call Morrison Gate & Fence at (469) 654-7729 to discuss your fence, gate, or automation needs.