Fence & gate company in Lewisville, TX

A Lewisville fence and gate contractor can help you choose a privacy fence, assess damaged posts and panels, or plan a driveway gate. Start with the fence’s purpose, the condition of its supports, and the space available for gate movement. Those details help determine whether repair, replacement, or a different layout makes sense.

You are here: Service areas → Lewisville.

Morrison Gate & Fence serves Lewisville as part of its Dallas-Fort Worth service area. Use the guidance below to prepare for a fence or gate estimate.

What should I consider when choosing a fence in Lewisville?

Start with what the fence needs to do: screen a yard, contain pets, define a boundary, or control vehicle access. Then consider the ground conditions, fence line, and locations where people need to pass through.

Look at these details before choosing a material or layout:

• Privacy: Solid wood layouts screen views; open metal styles preserve visibility.
• Ground clearance: Uneven ground affects gaps beneath panels and gates.
• Support: Posts and footings must suit the fence height, material, and gate loads.
• Access: Walk gates need usable clearance, while driveway gates need room to travel.
• Maintenance: Wood finishes, metal coatings, hinges, and moving parts need different care.

Separate appearance from function. A fence can look sound while a post is failing below grade. Likewise, a gate opening may be wide enough for a vehicle but poorly positioned for its turning path.

Which wood fence layout gives me more privacy?

Side-by-side and board-on-board wood fences both provide screening, but their picket arrangements differ.

| --- | --- | --- |Side-by-side | Pickets sit next to one another on horizontal rails. | Gaps can appear as wood dries and changes dimension. |Board-on-board | A second layer of pickets overlaps the spaces between the first layer. | Overlap maintains screening as boards move, but uses more material.

Choose the layout based on sightlines from the street, patio, and neighboring properties—not just a straight-on view.

Ask the estimate to identify the wood species, picket dimensions, rail arrangement, and post material. “Wood privacy fence” alone does not define those parts. Any trim or cap should also be listed separately so comparisons are meaningful.

Should I repair my fence or replace it?

Repair makes sense when damage is limited and the surrounding structure can support the repaired section. Replacement becomes more practical when deterioration is widespread or the current fence no longer meets your needs.

| --- | --- | --- |Broken pickets | Nearby pickets, rails, and posts remain sound. | Splitting or decay affects much of the fence. |Leaning section | The problem is isolated to a post or connection. | Multiple posts or footings have failed. |Sagging walk gate | Hinges, fasteners, or alignment need correction. | The gate frame and supporting post are both compromised.

A leaning panel does not automatically require replacing the whole run. The important question is why it leans. Loose fasteners, a decayed post, and a moving footing require different repairs.

For partial work, also discuss appearance. New pickets or rails may not match weathered wood immediately, even when the material and dimensions are similar.

Should I choose a swing gate or a sliding driveway gate?

A swing gate needs a clear arc in front of or behind the opening. A sliding gate travels alongside the fence line and needs enough clear space beside the driveway for its movement.

Choose a swing layout to explore when there is sufficient setback and reasonably clear ground throughout the gate’s travel. Check parked vehicles, landscaping, and changes in driveway elevation. A slope can interfere with the bottom of a swinging leaf.

Choose a sliding layout to explore when the swing arc would be obstructed and usable side space is available. Track-style systems need a suitable travel surface. Cantilever systems use supporting rollers and require additional gate length beyond the opening.

Neither option solves every tight driveway. Measure the clear opening, available side space, and distance to common parking positions. Gate weight, wind exposure, and structural support also affect the final design.

What does an automatic driveway gate need besides a motor?

An automatic gate needs a sound gate structure, a compatible operator, electrical planning, access controls, and safety devices selected for the installation.

Important components include:

• Hinges or rollers: These must allow smooth travel without binding.
• Gate operator: Its capacity and intended use must suit the gate.
• Photoelectric sensors and sensing edges: These may be required to address identified entrapment hazards.
• Access controls: Options can include remotes, keypads, or an intercom.
• Manual release: Users need a way to disengage the operator as designed.
• Power supply: Wiring, disconnects, and any backup arrangement need planning.

Do not use a stronger operator to compensate for a dragging or twisted gate. Correct the mechanical problem first.

A site assessment should identify pinch points and other entrapment zones. Sensor locations and protection methods depend on the actual gate layout, not a generic equipment list.

What should a fence or gate estimate include?

An estimate should describe what will be removed, what will be installed or repaired, and which components are included. That makes it easier to compare scopes rather than treating different proposals as interchangeable.

For a fence, look for the approximate run length, proposed height, material, picket layout, post specification, and number of gates. Clarify whether demolition, haul-off, staining, or other finish work is included or excluded.

For a driveway gate, ask for the clear opening, swing or slide configuration, frame and infill materials, hardware, and any automation equipment. Electrical work and access-control accessories should be clearly identified.

Mention known access restrictions and whether an existing fence must remain functional during the work. Property-line uncertainty, drainage concerns, or concealed deterioration can affect the scope and should be discussed before installation begins.

Can a leaning fence be repaired without replacing everything?

Yes, if the lean comes from an isolated failed post, loose connection, or damaged footing and the adjoining sections remain sound. The repair should address that cause rather than simply straighten the panel. If several supports have deteriorated, replacing a longer section may be more practical than repeated spot repairs.

Can my existing driveway gate be automated?

Possibly. The gate must move freely and have sound posts, hinges or rollers, and a frame suitable for operator loads. Its size, weight, travel path, power access, and entrapment hazards also matter. A site assessment can determine whether the existing gate is a suitable candidate or needs structural changes first.

Do I need approval before installing a fence in Lewisville?

Check with the City of Lewisville about requirements for your specific property and proposed work before installation. If your property is subject to an HOA or deed restrictions, review those separately. Confirm the property boundary and any easements, and arrange utility locating before digging. Do not assume an old fence marks the boundary.

What should I send when requesting a fence estimate?

Send photos of the full fence line or driveway opening, close-ups of damaged areas, and approximate measurements. Include your Lewisville property address, preferred material, desired height, gate needs, and whether you want repair or replacement. Note slopes, restricted access, and existing automation equipment. These details help define what needs checking on site.

To discuss your Lewisville fence or gate project, request an estimate from Morrison Gate & Fence or call (469) 654-7729.