Wood Fence Installation in McKinney, TX

Most new fence projects begin with a specific problem. A back patio may be in full view of the neighbors, the edge of the lot may never have been clearly marked, or an older fence may have worn out along so much of its length that fixing it piece by piece no longer adds up.

Other homeowners want to turn an open lawn into a more enclosed outdoor space, or tuck away a side yard used for bins, pool equipment, or an AC unit. Since new gates go in with the fence, it's also a natural time to decide where walk gates and wider openings will be most useful.

For backyard privacy, cedar is a frequent pick. Closely set boards create a continuous screen, and the natural color of the wood tends to sit comfortably beside lawns, hedges, and planting beds. Board layout shapes both the look and the screening: side-by-side pickets read clean and simple, while a board-on-board pattern overlaps each gap so the view stays blocked as boards move with the weather.

North Texas sun, heat, and seasonal storms will gradually change how any wood fence looks. Periodic staining or sealing helps maintain its color, and keeping sprinklers and soil off the lower boards helps too. We'll talk through realistic upkeep so the style you pick fits how much maintenance you want to do.

Around a home, a wood fence usually takes on several jobs at once. It may enclose the backyard, return along the side yards to the house, follow a boundary with a neighbor, and wrap an outdoor living area where more screening is wanted. Some runs may call for full height while others can stay lower.

Where the fence meets a walkway or the driveway, the gate should be planned alongside it so it matches and swings where it needs to. See our residential gate options for wood and metal gates that can be built into a new fence line.

1. Review the yard and overall property layout together.
2. Discuss what you want to screen and how you move in and out of the yard.
3. Note where existing fence sections and gates sit and how they connect.
4. Lay out the fence line, corners, and gate openings.
5. Prepare the installation areas along the planned line.
6. Install posts, rails, and boards as the design calls for.
7. Check alignment across the run and make sure every gate works as intended.

Privacy is really about sightlines. Neighboring homes, second-story windows, a corner lot, or a patio set near the property line can each change where full screening matters and where it doesn't. Established trees and beds may help screen the yard, or they may affect where posts can go.

Planning also covers the practical pieces: keeping side-yard access open, tying into existing fence lines, meeting masonry columns or walls where they're present, and placing gate openings where people actually walk. If your home is in an HOA, or if City of McKinney requirements may apply, it's worth checking those before the design is final. We can build to the guidelines you receive.

Enclosing a yard shouldn't make it harder to use. When we lay out a fence, we account for walk gates, side-yard passages, the route from the driveway, access for service visits, and room around landscaping. If you think you may want to automate a gate later, planning the opening and its surroundings now can save changes down the road.

For walk and yard gates, see our gate installation service. For wider vehicle entrances, browse our driveway gate styles.

A full replacement deserves a look when wear shows up along most of the fence, posts keep loosening, long stretches lean, or big sections are damaged. It also makes sense when your privacy needs or yard layout have changed since the old fence went up. When the trouble is limited to a few spots, our fence repair service may be the better starting point.

Installation tends to fit when there's no fence yet, when much of the existing one has deteriorated, when the fence line is being moved, or when you want a new privacy configuration.

Repair tends to fit when damage is localized, when only certain boards or posts are affected, and when most of the structure is still serviceable.

Read more about our approach to new fence installation or about repairing an existing fence.

Residential layouts in McKinney range widely, from older lots with mature trees to newer homes with tighter side yards. Some properties have masonry columns or walls the fence needs to meet, some share a fence line with neighbors, and some have landscaping that sits right where a post would naturally go. We plan around what's actually on the lot.

Driveway and gate openings often set the rhythm of the layout, since they decide where people and equipment pass through. Where an HOA or City of McKinney requirement applies, it can shape height, style, or timing.